1,Build-in industrial micro controller.
2,One-key setting,digital display,auto memory function.
3,Fully 4-stage PWM charge management.
4,Build-in short-circuit protections,open-circuit protections,reverse protections,over-load protections
5,Dual mosfet Reverse current protections ,low heat productions.
*all red color voltage*2 while using 24V system
- 1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
- 2. The battery cable should be as short as possible to minimize loss.
- 3. The regulator is only suitable for lead acid batteries:OPEN,AGM,GEL it is not suited for nickel metal hydride,lithium ions or other batteries.
- 4.The charge regulator is only suitable for regulating solar modules.Never connect another charging source to the charge regulator.